| Last Modified: 11-29-2007 | 1.6 D | |
| Service Category: Vehicle Exterior | Section: Sliding Roof/Convertible | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM0000030NN004X |
| Title: SLIDING ROOF / CONVERTIBLE: SLIDING ROOF SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING (2008 Sequoia) | ||
HOW TO PROCEED WITH TROUBLESHOOTING
HINT:
- Use these procedures to troubleshoot the sliding roof system.
- *: Use the Techstream.
|
1. |
VEHICLE BROUGHT TO WORKSHOP |
|
|
2. |
INSPECT BATTERY VOLTAGE |
Standard voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
|
|
3. |
CHECK COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM* |
(a) Using the Techstream to check if the LIN communication system is functioning normally.
Result
|
Result |
Proceed to |
|---|---|
|
LIN DTC is not output |
A |
|
LIN DTC is output |
B |
| B |
|
GO TO LIN COMMUNICATION SYSTEM |
|
|
4. |
PROBLEM SYMPTOMS TABLE |
(a) Refer to the Problem Symptoms Table
.
Result
|
Result |
Proceed to |
|---|---|
|
Fault is not listed in Problem Symptoms Table |
A |
|
Fault is listed in Problem Symptoms Table |
B |
| B |
|
Go to STEP 6 |
|
|
5. |
OVERALL ANALYSIS AND TROUBLESHOOTING* |
(a) Operation Check
(b) Initialization
(c) Terminals of ECU
(d) Data List/Active Test
|
|
6. |
ADJUST, REPAIR OR REPLACE |
|
|
7. |
CONFIRMATION TEST |
| NEXT |
|
END |
|
|